特种油脂测试全部检测项目

ASTM D1092(Apparent viscosity)

ASTM D1217(Standard Test Method for Density and Relative Density(Specific Gravity) of Liquids by Bingham Pycnometer)

ASTM D1264(Test Method for Water Washout Characteristics of Lubricating Greases)

ASTM D129(Sulfur in Petroleum Products (General Bomb Method))

ASTM D1298(Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method)

ASTM D1298(Standard test method for density and relative density(specific gravity) 4.13)

ASTM D130(Standard Method for Detection of Copper Corrosion from Petroleum Products by the Copper Strip Tarnish Test)

ASTM D1403(Cone Penetration of Lubricating Grease Using One Quarter and One Half Scale Cone Equipment)

ASTM D1478(Test Method for Low Temperature Torque of Ball Bearing Greases)

ASTM D1500(Standard Test Method for ASTM Color of Petroleum Products(ASTM Color Scale) )

ASTM D1552(Sulfur in Petroleum Products (High-Temperature Method))

ASTM D1743(Measurement of Load–Carrying Capacity of Lubricating Grease(Timken Method))

ASTM D1744(Standard Test Method for Water in Petroleum Products, by Coulometric Karl Fisher reagent)

ASTM D1748(Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet)

ASTM D1831(Roll Stability of Lubricating Grease)

ASTM D189(Conradson Carbon Residue of Petroleum Products)

ASTM D2155(Standard Test Method of Test for Autoignition Temperature of Liquid Petroleum Products)

ASTM D217(Test Method for Cone Penetration of Lubricating Grease)

ASTM D2265(Determining Corrosion Preventive Properties of Lubricating Greases)

ASTM D2266(ASTM for wear preventive characteristics of lubricating grease(4 - balls))

ASTM D2270(Calculating Viscosity Index from Kinematic Viscosity at 40 and 100 °C)

ASTM D2273(Standard Test Method for Trace Sediment in Lubricating Oils)

ASTM D2509(Measurement of Load–Carrying Capacity of Lubricating Grease(Timken Method))

ASTM D2532(Viscosity Stability, 72 hours @ -40 ?C)

ASTM D2595(Evaporation Loss of Lubricating Greases Over Wide Temperature Range)

ASTM D2596(Measurement of Extreme Pressure Properties of Lubricating Grease(Four-Ball Method))

ASTM D2596(Measurement of Load–Carrying Capacity of Lubricating Grease(Timken Method))

ASTM D2602(Apparent Viscosity of Engine Oils at Low Temperature Using the Cold-Cranking Simulator)

ASTM D2603(Standard Test Method for Sonic Shear Stability of Polymer-Containing Oils)

ASTM D2622(Sulfur in Petroleum Products (X-ray Spectrographic Method))

ASTM D287(Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products(Hydrometer Method) )

ASTM D3336(Life of Lubricating Greases in Ball Bearings at Elevated Temperatures)

ASTM D3527(Life Performance of Wheel Bearing Grease)

ASTM D3704(Wear Preventive Properties of Lubricating Greases Using the(Fales) Block On Ring Test Machine in Oscillating Motion)

ASTM D4048(Copper strip corrosion, grease)

ASTM D4052(Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter)

ASTM D4170(Life Performance of Wheel Bearing Grease)

ASTM D4172(Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid(Four-Ball Method))

ASTM D4173(Standard test method for wear preventive characteristics of lubricating grease(four-ball method))

ASTM D4175(Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants)

ASTM D4177(Standard Practice for Automatic Sampling of Petroleum and Petroleum Products)

ASTM D4289(Manual Sampling of Petroleum and Petroleum Products)

ASTM D4289(Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids)

ASTM D445(Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids(and the Calculation of Dynamic Viscosity)

ASTM D4530(Micro Carbon Residue of Petroleum Products)

ASTM D4624(Measuring Apparent Viscosity by Capillary Viscometer at High Temperature and High-Shear Rates)

ASTM D4636(Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils)

ASTM D4683(Measuring Viscosity at High Temperature and High Shear Rate by Tapered Bearing Simulator)

ASTM D4684(Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature)

ASTM D4741(Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer)

ASTM D482(Ash from Petroleum Products)

ASTM D4898(Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis)

ASTM D4927(Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength—Dispersive X-Ray Fluorescence Spectroscopy)

ASTM D4951(Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectroscopy)

ASTM D5185(Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectroscopy)

ASTM D5185(Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry(ICP-AES) )

ASTM D5293(Evaluation of Automotive Engine Oils Between -5 and -30 °C Using the Cold-Cranking Simulator)

ASTM D5306(Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids)

ASTM D5481(Measuring Viscosity at High Temperature and High Shear Rate by Multicell Capillary Viscometer)

ASTM D566(Dropping Point of Lubricating Grease)

ASTM D5706(Extreme Pressure Properties of Lubricating Greases Using a High Frequency, Linear Oscillation(SRV)Test Machine)

ASTM D5707(Friction and Wear Properties of Lubricating Greases Using a High Frequency, Linear Oscillation(SRV) Test Machine)

ASTM D5864(Determination of Aerobic Aquatic Biodegradation of Lubricants or Their Components)

ASTM D5949(Pour Point of Petroleum Products(Automatic Pressure Pulsing Method))

ASTM D5949(Standard Test Method for Pour Point of Petroleum Products(Automatic Pressure Pulsing Method))

ASTM D5950(Pour Point of Petroleum Products (Automatic Tilt Method))

ASTM D5969(Corrosion Prevention)

ASTM D5985(Pour Point of Petroleum Products (Rotational Method))

ASTM D6138(Friction and Wear Properties of Lubricating Greases Using a High Frequency, Linear Oscillation(SRV) Test Machine)

ASTM D6184(Oil Separation from Lubricating Grease(Conceal Sieve Method))

ASTM D6185(Low Temperature Torque of Greases Contaminated with Water)

ASTM D6304(Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration)

ASTM D6547(Standard Test Method for Corrosiveness of Lubricating Fluid to Bimetallic Couple)

ASTM D6595(Trace metal content by RDE-AES)

ASTM D664(Acid Number for Petroleum Products by Potentiometric Titration)

ASTM D6709(Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine))

ASTM D6793(Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus)

ASTM D6922(Determination of Homogeneity and Miscibility in Automotive Engine Oils)

ASTM D877(ASTM for electrical dielectric breakdown voltage of insulating liquids using disk electrodes)

ASTM D892(Standard Test Method for Foaming Characteristics of Lubricating Oils )

ASTM D92(Standard Test Method for Flash and Fire Points by Cleveland Open Cup)

ASTM D93(Standard Test Method for Flash Point by Prensky-Martens Closed Tester)

ASTM D94(Saponification Number of Petroleum Products)

ASTM D942(Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Bomb Method)

ASTM D97(Standard Test Method for Pour Point of Petroleum Oils)

ASTM D972(Standard Test Method for Evaporation Loss of Lubricating Greases and Oils)

ASTM D974(Standard Test Method for Acid and Base Number by Color Indicator Titration)

ASTM F312(Standard Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters)

ASTM STP 509A(Single Qindar Engine Tests, Part IV)

DEF STAN 05-50(Part 09)(Oil Separation from Lubricating Grease(Conceal Sieve Method))

Def Stan 05-50(Part 61)Method 22(Elastomer Compatibility)

Def Stan 05-50(Part 61)Method 24(Lubricant Compatibility)

Def Stan 05-50(Part 61)Method 9(Oxidative Stability)

DEF STAN 05-50(Part 62)(Low Temperature Torque of Greases Contaminated with Water)

DEF STAN 05-50(Part 63)(Working Stability of Grease Contaminated with Water)

FED-STD-791,Method 3005(Dirt)

FED-STD-791,Method 3009(Solid Particle Contamination In Hydraulic Fluids)

FED-STD-791,Method 3010(Sediment/Ash)

FED-STD-791,Method 3012(Determination Of Particulate Matter In Aerospace Hydraulic Fluids)

FED-STD-791,Method 313(Worked stability)

FED-STD-791,Method 321(Oil separation)

FED-STD-791,Method 335(Gear wear)

FED-STD-791,Method 3403 Mod(2)(Lubricant Compatibility)

FED-STD-791,Method 3410(ERDCO Bearing Rig)

FED-STD-791,Method 3411(Thermal Stability & Corrosivity)

FED-STD-791,Method 3458(Low Temperature Stability Test For Oil)

FED-STD-791,Method 3463(Boiling water immersion)

FED-STD-791,Method 3465(Storage Stability Test Of Fluids And Lubricants)

FED-STD-791,Method 3467(Storage stability)

FED-STD-791,Method 3467.1(Storage stability, penetration)

FED-STD-791,Method 350(Evaporation Loss Of Lubricating Greases And Oils(High Temperature))

FED-STD-791,Method 3500(Acid Assay)

FED-STD-791,Method 352(Effect Of Evaporation On Flammability)

FED-STD-791,Method 3603(Elastomer Compatibility)

FED-STD-791,Method 3604(Elastomer Compatibility)

FED-STD-791,Method 5308 mod(Oxidation & Corrosion Stability)

FED-STD-791,Method 5309(Corrosion on copper)

FED-STD-791,Method 5322(Salt spray)

FED-STD-791,Method 6052(High-Temperature-High-Pressure Spray Ignition)

FED-STD-791,Method 6508(1)(Load Carrying Capability - Ryder Gear)

FTM 3013(Particulate contamination)

FTM 3214(Foaming Characteristics of Aircraft Turbine Lubricating Oils (Dynamic Foam Test))

FTM 3403(Compatibility of Turbine Lubricating Oils)

FTM 3411(Thermal stability and corrosivity at 274°C (525°F))

FTM 5003(Deposition test (WADC))

FTM 5305(Corrosiveness of Lubricants at 232°C (450°F))

FTM 5307(Corrosiveness and Oxidation Stability of Aircraft Turbine Engine Lubricants)

FTM 5321(Lead corrosion)

FTM 791 Method 3403(Compatibility with other oils)

FTM 791 Method 3604(Elastomer Compatibility)

GB 440-附录A(粘度温度系数)

GB/T 11133(液体石A产品水含量测定法（卡尔·费休法）)

GB/T 12579(润滑油泡沫特性测定法)

GB/T 17476(使用过的润滑油中添加剂元素、磨损金属和污染物以及基础油中某些元素测定法（电感耦合等离子体发射光谱法）)

GB/T 1884(石油和液体石油产品密度测定法（密度计法）)

GB/T 1885(石油计量表)

GB/T 1995(石油产品粘度指数计算法)

GB/T 259(石油产品水溶性酸或碱试验法)

GB/T 259(石油产品水溶性酸及碱测定法)

GB/T 260(石油产品水分测定法)

GB/T 261(石油产品闪点测定法（闭口杯法）)

GB/T 262(石油产品苯胺点测定法)

GB/T 264(石油产品酸值测定法)

GB/T 265(石油产品运动粘度测定法和动力粘度计算法)

GB/T 267(石油产品闪点与燃点测定法（开口杯法）)

GB/T 268(石油产品残炭测定法)

GB/T 269(润滑脂和石油脂的锥入度测定法)

GB/T 3142(润滑剂承载能力测定法（四球机法）)

GB/T 3498(润滑脂宽温度范围滴点测定法)

GB/T 3535(石油产品倾点测定法)

GB/T 3536(石油产品闪点和燃点测定法（克利夫兰开口杯法）)

GB/T 387(深色石油产品硫含量测定法（管式炉法）)

GB/T 391(石油产品腐蚀度测定法)

GB/T 4756 (石油和液体石油产品取样法（手工法）)

GB/T 5018(润滑脂防腐蚀性试验法)

GB/T 504(选择性溶荆（酚含量）)

GB/T 508(石油产品灰分测定法)

GB/T 5096(石油产品铜片腐蚀试验法)

GB/T 510(石油产品凝点测定法)

GB/T 511(石油产品和添加剂机械杂质测定法（密度计法）)

GB/T 511(石油产品和添加剂机械杂质测定法（重量法）)

GB/T 6536(石油产品蒸馏测定法)

GB/T 6538(发动机油表观黏度测定法（冷启动模拟机法）)

GB/T 6540(石油产品颜色测定法)

GB/T 7304(石油产品和润滑剂中和值测定方法（电位滴定法）)

GB/T 7325(润滑脂和润滑油蒸发损失测定法)

GB/T 7326(润滑脂铜片腐蚀试验法)

GJB 1264(航空涡轮发动机润滑油试验方法 低温下静置后的粘度及粘度变化测定法)

GJB 1264(航空涡轮发动机润滑油试验方法 固体颗粒杂质测定法)

GJB 1264(航空涡轮发动机润滑油试验方法热安定性和腐蚀性测定法)

GJB 1264(合成酯类润滑剂试验方法一元酸组成测定（气相色谱法）)

GJB 1820(航空涡轮发动机用合成润滑油与硅橡胶相容性测定法)

GJB 380(自动颗粒计数法测定固体颗粒污染度)

GJB 496(润滑油232?C腐蚀测定法)

GJB 497(航空润滑油铅腐蚀测定法)

GJB 498(航空涡轮发动机润滑油泡沫特性测定法（静态泡沫试验）)

GJB 499(航空涡轮发动机润滑油腐蚀性和氧化安定性测定法)

GJB 562(航空发动机润滑油相容性测定法)

GJB 563(轻质航空润滑油腐蚀和氧化安定性测定法（金属片法）)

GJB 688(航空润滑油飞行试验规范)

GJB 9130(合成航空润滑油轴承腐蚀性评定方法)

GJBz 20052(润滑油中金属含量分析—原子发射光谱法)

MIL-H-27601B 3.3.12(Thermal stability)

MIL-H-27601B 3.3.7(Chlorine)

MIL-L-22851-4.5.2 and 6.3.c(Trace Metal Content ppm Max)

MIL-PRF-5606H 3.5.2(Low temperature stability)

MIL-PRF-6083G 3.4.9(Storage stability)

MIL-PRF-6083G 3.5.6(Toxicity）

NB/SH 0306(润滑油承载能力的评定 FZG目测法)

NB/SH 0632(比热容的测定 差示扫描量热法)

NB/SH 0870(石油产品的动力黏度和密度的测定及运动黏度的计算 斯塔宾格黏度计法)

NB/SH 0946(多元醇酯和双酯燃气涡轮发动机润滑油总酸值测定 自动电位滴定法)

SAE ARP 5088(Test Method for the Determination of Total Acidity in Polyol Ester and Diester Gas Turbine Engine Lubricants by Automatic Potentiometric Titration)

SAE ARP 5996(Evaluation of Coking Propensity of Aviation Lubricants Using the Single Phase Flow Technique)

SAE AS 598(Aerospace Microscopic Sizing and Counting of Particulate Contamination for Fluid Power Systems)

SAE J300(Viscosity, Low Temp Cold Crank Sim)

SH/T 0109(润滑脂抗水淋性能测定法)

SH/T 0120(酚精制润滑油酚含量测定法)

SH/T 0189(润滑油抗磨损性能测定法（四球机法）)

SH/T 0202(润滑脂极压性能测定法-四球机法)

SH/T 0204(润滑脂抗磨性能测定法-四球机法)

SH/T 0208(航空液压油热氧化安定性及腐蚀测定法)

SH/T 0259(润滑油热氧化安定性测定法)

SH/T 0265(内燃机油高温氧化和轴瓦腐蚀评定法（L-38法）)

SH/T 0324(润滑脂钢网分油测定法-静态法)

SH/T 0325(润滑脂氧化安定性测定法)

SH/T 0336(润滑脂杂质含量测定法-显微镜法)

SH/T 0338(滚珠轴承润滑脂低温转矩测定法)

SH/T 0428(高温下润滑脂在滚珠轴承中工作寿命测定法)

SH/T 0436(航空用合成润滑油与橡胶相容性测定法)

SH/T 0451(液体润滑剂贮存安定性试验)

SH/T 0452(润滑脂贮存安定性实验法)

SH/T 0472(合成航空润滑油中微量金属含量测定法（原子吸收法）)

SH/T 0505(含聚合物油剪切安定性测定法（超声波剪切法）)

SH/T 0562(低温下发动机油屈服应力和表观黏度测定法)

SH/T 0618(高剪切条件下的润滑油动力黏度测定法（雷范费尔特法）)

SY 2614(颜色，用85%（体积）无色煤油稀释)

SY 2618(热氧化安定性（250?C))

ZB E34 014(润滑油抗氧化安定性测定法)